Springtime Sprinkler Tune-Up  - On the House

Springtime Sprinkler Tune-Up 

By on June 16, 2018
sprinkler

Get the warm watering season off to a great start with these Springtime sprinkler tune-up tips:

 

Make Sure Spring Has Sprung:

Although all signs might be pointing to the arrival of spring, the soil beneath the landscape is always the last to thaw.  Starting your sprinkler system while the ground is still frozen can result in damage to the pipes.  Use a shovel to make sure that the soil is frost-free 12 inches deep.  If it is still solid as a rock, then wait another week and test it again before starting the sprinkler system.

 

Regain Control:

Run a check of the irrigation controls and programs. This includes dusting away the cobwebs on the timer, making sure the date and time is correct, and that the settings are appropriate for your landscape’s watering needs. Replace the back-up battery in the timer/controller every 6 months, and keep a copy of the watering schedule nearby.

 

Unobstructed Flow:

Check for rocks, dirt, sand and other types of debris that may block the even flow of water from sprinkler heads. Uneven distribution can lead to too much water in some areas and not enough in others, both resulting in an unhealthy landscape and wasted water. Inspect spray heads and make sure they haven’t become buried and debris has not accumulated around them during the winter.

 

Out with the old:

Nozzles and sprinkler heads are designed to withstand normal wear and tear of irrigation, but are no match for errant lawn mowers, the neighbor’s dog or snowplows. Replace cracked, chipped or worn components, such as sprinkler heads, nozzles, valves or pipes.  A broken sprinkler can wreak havoc on lawns, gardens, and water bills, so it is important to check and replace them periodically.

 

The Heart of the System:

Valves are the heart of any irrigation system. They regulate the distribution of water throughout the entire system. A leaky valve will waste water, and increase your water bill.  Visually inspect each valve to make sure they are operating properly. Before turning on any water to the system, make sure all manual drain valves are returned to the closed position.  Overly wet areas in the lawn, resulting in muddy and/or barren patches, may be a result of a leaky valve.

 

Keep The Hammer in The Tool Chest:

Water hammer is a high-pressure surge that occurs when a valve is first opened.  An initial pressure surge can result in pipe bursts and damaged valves. When restoring water to your sprinkler system, open the main water valve slowly to allow pipes to fill with water in a gradual and controlled manner, thus preventing a water hammer and costly damage.

 

Pressure Check:

When you first turn the main water valve back on, make sure the water pressure is at a safe operating range for sprinkler systems.  A system with too much pressure will result in cracked pipes, busted valves, sprinkler head leaks and inefficient watering.  Invest in a water pressure gauge that can be used to measure water pressure in your home and yard.  These devices typically connect to a hose faucet and give you a good idea of the pressure in your irrigation system.  If the pressure is above the suggested operating range (typically 40 -65 PSI), a pressure regulator may be required to prevent damage to the sprinkler system or undesirable results.  For example, if water is “misting” out of your sprinkler heads, your pressure is too high and should be reduced.

 

http://www.rainbird.com/homeowners/spring-sprinkler-tune

About onthehouse

Keep up with The Carey Brothers

Join our mailing list to receive the latest news, tips and updates from our team as we put on our radio show - On The House, go to trade and consumer shows and share our journey in home improvement, building and home products.

You have Successfully Subscribed!

Pin It on Pinterest